- 积分
- 11
- 实力分
- 点
- 金钱数
- 两
- 技术分
- 分
- 贡献分
- 分
|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有帐号?注册会员
x
国外论坛看到的, 不知这里有人发过没有, 我将大概意思翻成中文.
版权属于原作者. 原贴地址: http://www.siemensplanet.com/forum/viewtopic.php?t=5122
转贴:"my phone auto answer during receiving the call ... but i dit not set to auto answer this is happened after i updated the firmware to w26 ... any body know to stop this function ..."
SXG75一來電就自動接聽,可我未作任何自動接聽的設置,這毛病是我將其刷到26版后才出現的,哪位朋友能指點下怎么樣才能取消這一功能嗎?
answer:
The phone has a hidden "Auto Answer" function, which should be the culprit in your case.
From the standby screen, type "000000" (six zeroes) and press the green key. You should now be at the Field Test menu. BE CAREFUL WITH WHAT YOU MESS AROUND HERE WITH, AS YOU MAY KILL YOUR PHONE!
There's an "Auto Answer" entry in this menu. Select it, and you can then turn it off.
回答: SXG75具有“自動接聽”的功能,但這功能是隱藏的,你遇到的問題應該就是打開了“自動接聽”。
在桌面,輸入6個零,再按綠色撥號鍵,你便進去了“測試菜單”,請注意,此菜單中的設置你的格外小心,每一項設置如不明白其含義的話不要隨意更改,否則可能導致你的手機被損壞。
找到 auto anser 自動接聽菜單,你便能開啟或者關閉此功能。
[ 本帖最后由 javacoffee 于 2008-9-24 17:55 编辑 ] |
评分
-
查看全部评分
|