- 积分
- 427
- 实力分
- 点
- 金钱数
- 两
- 技术分
- 分
- 贡献分
- 分
|
马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。
您需要 登录 才可以下载或查看，没有帐号？注册会员
x
拿来一机子.工程机.SKEY为0.不能正常写入SKEY.
刷了别人的FULLFLASH.[BOOTCORE除外].
然后修复之..使用软件为X65PAPUA1.0.8
过程如下- Boot in "Service mode"...
- Press RED key (Power ON)!
- Auto Ignition...
- Transfer boot...
- Boot in "Service mode" Ok
- Awaiting Power On phone...
- Getting Information:
- Model: SIEMENS S7C 47 lg8
- Phone is in "Format FFS?". SecurityStatus: "CustomerMode"
- IMEI: 004400008622654
- HWID: 400
- Accumulator Voltage: 3949 mV.
- Checking values entered...
- Invalid SKEY! [写入SKEY出错]
- Not all fields are filled correctly!
- Sending SKEY/BKEY to the phone...
- Error of input SKEY or BKEY
- Check field SKEY!
- Checking values entered...
- Test "Service key" (SKEY)...
- Sending SKEY/BKEY to the phone...
- SKEY it is entered, wait...
- Pause 4 second(s)...
- SecurityStatus: CustomerMode
- Invalid SKEY!
- Each incorrect input increases a pause in 2 times!
- Phone disconnection...
- Phone is Turned Off...
- Phone is OFF (closed)!
- Auto Ignition...
- Transfer boot...
- BOOT is loaded...
- Pause 2 sec...
- Getting Information... [在FLASH页"NEW BCORE"]
- FlashID: 0089,880D (64Mb)
- S75 SIEMENS 004400008622654
- HASH: 5A50B8D6D5CF66E93FDE56BD71440EC0
- OTP ESN: 72198195
- OTP IMEI: 004400008622654
- Test data bus D0..D15...OK.
- Test address bus A2..A22...OK.
- Reading of segment BCORE...
- BCORE segment are kept in 72198195_A0000000_BCORE_070324125056.bin
- Was BCORE versions : "main_1.0_V11 "
- Write down BCORE version: "main_1.0_V11 " [没有更新]
- BCORE enable...
- New BCORE it is written down.
- Do not forget to make Freeze
- Search of a segment EELITE...
- Search of a segments EEFULL...
- In total EEP blocks: 145
- EEPROM Blocks saved in .\Backup\72198195_EEP_070324125146.eep
- Boot released. Everything is closed.!
- Checking value of SKEY from page "Codes"... [在FLASH页.点重新计算各码项.因为之前的SKEY为0]
- Incorrect value of SKEY!
- Skey can be from 1 to 99999999 inclusively!
- Checking value of SKEY from page "Codes"...
- Incorrect value of SKEY!
- Skey can be from 1 to 99999999 inclusively!
- Checking values entered...
- Test "Service key" (SKEY)...
- SKEY or ESN does not match with HASH entered!
- Sending SKEY/BKEY to the phone...
- No answer from the phone
- Check port number, cable, phone, mode!
- Checking values entered...
- Calculate HASH and BootKEY from ESN and SKEY...
- New HASH: A2E909EE68A644F95FC4F9E13F11DC4B
- New BootKEY:0B91A39B25F90B24BFDF2210D879FAD9
- Checking values entered...
- Test "Service key" (SKEY)...
- Sending SKEY/BKEY to the phone...
- No answer from the phone
- Check port number, cable, phone, mode!
- Boot in "Service mode"...
- Press RED key (Power ON)!
- Auto Ignition...
- Transfer boot...
- Boot Not loaded!
- Checking values entered...
- Test "Service key" (SKEY)...
- Sending SKEY/BKEY to the phone...
- SKEY it is entered, wait...
- Pause 8 second(s)...
- SecurityStatus: CustomerMode
- Invalid SKEY!
- Each incorrect input increases a pause in 2 times!
- Phone disconnection...
- Phone is Turned Off...
- Phone is OFF (closed)!
- Checking value of SKEY from page "Codes"...[提示出错.要ＣＯＤＥＳ页面的ＳＫＥＹ]
- Auto Ignition...
- Transfer boot...
- BOOT is loaded...
- Pause 2 sec...
- Getting Information... [在CODE页.写入SKEY12345678.然后用ESN和SKEY计算ＨＡＳＨ和ＢＳＫＥＹ.写入]
- FlashID: 0089,880D (64Mb)
- BCORE Cleared!
- OTP ESN: 72198195
- OTP IMEI: 004400008622654
- Test data bus D0..D15...OK.
- Test address bus A2..A22...OK.
- Bcore S/SL75 found
- Reading of segment BCORE...
- BCORE segment are kept in 72198195_A0000000_BCORE_070324125341.bin
- Search of a segment EELITE...
- Search of a segments EEFULL...
- In total EEP blocks: 145
- EEPROM Blocks saved in .\Backup\72198195_EEP_070324125415.eep
- Replacement of blocks EEPROM in the buffer ...
- EEPROM: Block 76 replaced.
- EEPROM: Block 52 replaced.
- EEPROM: Block 5123 replaced.
- EEPROM: Block 5122 replaced.
- EEPROM: Block 5008 replaced.
- EEPROM: Block 5077 replaced.
- EEPROM: Block 5009 replaced.
- EEPROM: Block 5121 replaced.
- New Master codes:
- *#0000*12345678#
- *#0001*12345678#
- *#0002*12345678#
- *#0003*12345678#
- *#0004*12345678#
- *#0005*12345678#
- BCORE "Cleared", recalculation impossible ［重新计算完成！］
- Record of the changed blocks in phone...
- Write down EEPROM segments...
- EEPROM segments write down.
- Boot released. Everything is closed.!
- Boot in "Service mode"...
- Press RED key (Power ON)!
- Auto Ignition...
- Transfer boot...
- Boot in "Service mode" Ok
- Awaiting Power On phone...
- Getting Information:
- Model: SIEMENS S7C lg8
- Phone is in "Format FFS?". SecurityStatus: "FactoryMode"
- IMEI: 004400008622654
- HWID: 400
- Accumulator Voltage: 3949 mV.
- Getting Information:
- Model: SIEMENS S7C 47 lg8
- Phone is in "Service Mode". SecurityStatus: "FactoryMode"
- IMEI: 004400008622654
- HWID: 400
- Accumulator Voltage: 3935 mV.
- Checking values entered and necessary blocks...
- IMEI: 004400008622654
- Code(05): OTP is Closed for write
- OTP IMEI: 004400008622654
- OTP ESN: 72198195
- Reading block 5122...
- SKEY: X12345678
- Reading block 52...
- "Undo" will be established on the 01 version.
- Reading block 76...
- Reading block 5009...
- Reading block 5121...
- Reading block 5123...
- Freeze(0): OK!(Successfully!) ［读取各个码项.然后锁定到ＢＣＯＲＥ中］
- Attention: Remember new codes!
- At following inclusion keys will be written down in BCORE (and OTP)
- IMEI: 004400008622654
- SKEY: 12345678
- BootKEY: 0B91A39B25F90B24BFDF2210D879FAD9 ［完成后的，手机的各项信息］
- Phone disconnection...
- Phone is Turned Off...
- Phone is OFF (closed)!
[ 本帖最后由 comdin 于 2007-3-24 14:07 编辑 ] |
评分
-
查看全部评分
|
IP卡
狗仔卡
发表于 2007-3-24 12:59:04
提升卡
沉默卡
喧嚣卡
变色卡
显身卡
发表于 2007-3-24 13:05:45
楼主
发表于 2007-3-24 13:13:42
发表于 2007-3-24 13:19:58
发表于 2007-3-24 14:35:42