- 积分
- 261
- 实力分
- 点
- 金钱数
- 两
- 技术分
- 分
- 贡献分
- 分
|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有帐号?注册会员
x
今天终于找到可以正常运行的Uboot1.31 及U-boot.bin
此版本不需要打任何的补丁,也不需要和PC连接
(说明如是,我没有测试成功。不好下结论)
我的大S是24M版的.
运行后屏幕变黑,键盘灯亮
约5秒后,出现Linux启动画面
最后出现错误:
Unable to open an inital console
Kenel panic - not syncing on init found
Try Passing init ...
UBoot Loder 版本更新说明:
Fix IT:
v1.3:
* 1. Resolved problem witch LCD. Now worked fine!
v1.1:
1. Uboot File name for loading, rename to "u-boot.bin"
2. Loading Kernel (uImage.bin) in memory and send var. to u-boot for
loading kernel linux witchout PC.
Instructions:
1. Unpack archive to mmc card in next struct:
E:\Load_uboot.exe
E:\System\libs\uboot.ldd
2. Download last u-boot and kernel linux for sx1.
Put files to root MMC card:
E:\u-boot.bin
E:\uImage.bin
目前只能达到这个画面,期待啊(感谢Kidsun7的图):
[2006/11/08更新]
http://forum.oslik.ru/viewtopic.php?t=26000
根据上面贴子的描述,需要对MMC卡进行分区。
对于没有Linux系统的用户,可以使用Linux LiveCD 引导PC直接进入Linux系统,
并使用cfdisk分区:
ext2, 75MB
FAT16 (tyle no. 6 in cfdisk) ,尽可能大
和 Linux/swap (type no. 82 in cfdisk) ,32MB
格式化:
mkfs.ext2, mkfs.vfat -F 16 and mkswap
之后应该是要把rootfs uboot bootloader等拷贝并解压到FAT16分区中
把MMC卡放回手机,进入Symbian,文件管理器
运行bootloader应该就可以在大S上使用Linux了。
You can use any LiveCD that supports USB-readers
first, boot from LiveCD, after booting - connect reader and type
dmesg | tail
to see, what device it is (what "file" in /dev )
In my case it is /dev/sdc
Then, use cfdisk to make partitions
cfdisk /dev/sdc
partition 1 is ext2, I use ~75MB, type - Linux (no. 83)
partition 2 is FAT16, type - FAT16 (no. 6)
partition 3 is Linux Swap/solaris type no. 82
then format all partitions
mkfs.ext2 /dev/sdc1
mkfs.vfat -F 16 /dev/sdc2
mkswap /dev/sdc3
then :
mkdir /mnt/root
mount /dev/sdc1 /mnt/root
cd /mnt
tar -jxvf /path/to/root.tar.bz
umount /dev/sdc1
next, you have to put on FAT16 partition bootloader from here (ubootloader131.zip) and u-boot.bin and uImage.bin
[ 本帖最后由 foxcon 于 2006-11-8 09:41 编辑 ] |
评分
-
参与人数 1 | 实力分 +2 |
金钱数 +20 |
技术分 +3 |
收起
理由
|
山高高
| + 2 |
+ 20 |
+ 3 |
奖:感谢-你和大家分享资源与经验! |
查看全部评分
|