可能真的刷不好了，大家来看看我这部小八的问题

xnlgyjm

开不了机，我重刷软件。
试过纯净版，试过天堂版，都在二十秒左右之后提示升级失败。
解锁过，有FREIA升级显示如下：

COMM_LoadBoots : 等待手机开机 ...                 
COMM_LoadBoots : 手机已开机.        
COMM_PreloadBoots : number of phone models is 13
COMM_SendBoot : sending boot 0 for model 4
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 1 for model 4
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 2 for model 4
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 3 for model 4
COMM_SendBoot : waiting for boot ack
COMM_LoadBoots : 检查 bootcode ...  
COMM_LoadBoots : 内部 loader 版本是 01.00        
COMM_LoadBoots : EEPROM IMEI is 35001737124212
COMM_LoadBoots : 原始 IMEI 为 35001652060727 (  未锁定)   
COMM_LoadBoots : 找到  SIEMENS 6688 lg8 v21 (1)
COMM_LoadBoots : flash ids are 008988C2 [008988C4] - C489
COMM_LoadBoots : phone ids are D0060C45 [D0060C45]
COMM_Write : using D:\其它\其它\SIEMENS\升级东东\3.6天籁版\天堂3.6天籁版.BIN
COMM_Write : startaddress is 00A00000 end is 01000000
COMM_Write : adjusted startaddress is 00A00000 end is 00FFFFFF
COMM_NormalWriteFlashBlock : received target address is 00A00000
COMM_NormalWriteFlashBlock : received blocklength is 65536
COMM_NormalWriteFlashBlock : sending block
COMM_NormalWriteFlashBlock : flashbase is 0280, target address is 0280:0000
COMM_NormalWriteFlashBlock : erasing block
COMM_NormalWriteFlashBlock : flashbase is 0280, target address is 0280:0000
COMM_NormalWriteFlashBlock : writing block
COMM_NormalWriteFlashBlock : received target address is 00A10000
COMM_NormalWriteFlashBlock : received blocklength is 65536
COMM_NormalWriteFlashBlock : sending block
COMM_NormalWriteFlashBlock : flashbase is 0280, target address is 0284:0000
COMM_NormalWriteFlashBlock : erasing block
COMM_NormalWriteFlashBlock : flashbase is 0280, target address is 0284:0000
COMM_NormalWriteFlashBlock : writing block
COMM_NormalWriteFlashBlock : received target address is 00A20000
COMM_NormalWriteFlashBlock : received blocklength is 65536
COMM_NormalWriteFlashBlock : sending block
COMM_NormalWriteFlashBlock : flashbase is 0280, target address is 0288:0000
COMM_NormalWriteFlashBlock : erasing block
COMM_NormalWriteFlashBlock : flashbase is 0280, target address is 0288:0000
COMM_NormalWriteFlashBlock : writing block
COMM_NormalWriteFlashBlock : received target address is 00A30000
COMM_NormalWriteFlashBlock : received blocklength is 65536
COMM_NormalWriteFlashBlock : sending block
COMM_NormalWriteFlashBlock : flashbase is 0280, target address is 028C:0000
COMM_NormalWriteFlashBlock : erasing block
COMM_NormalWriteFlashBlock : erase error at 00A30000
TTY_CloseCOMPort : Closing COM1


是主板坏了吗？？有些搞不懂。求助大家一下。