cf62的问题

losong

唉，在网上怎么找也找不到啊，就是怎么刷机，不是升级，我想打补丁也不知该怎么办。

懵头懵脑

CF62国内没有高手用它，所以没有人研究它的补丁~~~~~~~

CF62的补丁只有国外的版本有~~~~~

adam5237

我到现在都不知道该怎么破解

axelzq

adam，这个是PX5AMD的说明文件，里面提到可以破解CF62的，有没有人成功我不知道。

如果直接就可以联上VK就无需破解了，但破解后有什么用呢，仅仅是备份？没有补丁。。。

为了升级的话用WINSUP就可以了。

CF62, MC60, C60 & M55 "NO" Test Points

--------------------------------------------------------------------------------
After reading many theards on this issue:
I have come to reason that the same solution (software) works for all four
phone types: CF62, MC60, C60 & M55.

I copied and edited the following from (www.unlockeasy.net)
Please Note: went using KEYWORDs "Siemens (phone of choice)" means the you can choose ONLY one of phone types that is
CF62 or MC60 or C60 or M55 for the examples.

Now lets get started::


Software required: Freia build 10 or higher, Siemens Dataexchange Software v.2.67, Siemens C60 Bootcore & PX5AMD Java Application for M55.

Unlocking:

1o - First install "Siemens Dataexchange Software v.2.67" software, power on the mobile phone, connect the cable and run the software. The phone must be without SIM card inside.

2o - Go to /java/jam/ folder and create a new folder, upload inside the two PX5AMD Java aplication archives (.jad & .jar).

3o - Now power on the "Siemens (phone of choice)" with a SIM card inside and run the Java aplication. This aplication will ask you for a code, code = 39116. Then you will see a menu, first select "backup bootcore", second select “patch bootcore” option and in a few seconds the phone will turn off. To finish repeat this process again and you will receive "Already OK" message. In this moment the bootcore will be patched.

4o - In this stept is very important make a full backup firmware with "Freia build " software selecting "Siemens (phone of choice)" type phone. If something goes bad you will have a good backup of your mobile phone to resolve the problem.

5o Now is time to flash the “patched bootcore C60". Run the software (Freia build 10), select "Siemens (phone of choice)" phone type , in "Configuration Functions" options select "Patched bootcore", press on “Write flash to phone” button, select “goodc60bootcore.zip.fls” flash file, click on “bootcore” box and press “OK” button. Software will ask to press ignition button of the mobile phone, press it and the software will flash the phone in a few.

6o - The final stept is to unlock the mobile phone. Select "Siemens (phone of choice)" i.e. CF62 phone type, with "Freia build" software and unlock the "Siemens (phone of choice)" i.e. CF62, with "Direct Unlock no map is saved" option and the software will unlock the phone in a few seconds.

Suggestions:

· Mobile phone battery must be full charged.
· Never disconnect the cable while phone is unlocking.
· Is very important select "Siemens (phone of choice)" phone type and no "Siemens (phone of choice) boot". If you select "Siemens (phone of choice)" boot", you will kill your phone.

adam5237

小A啊，他的说明是很简单的
就是说用PX55AMD破解
问题是CF62V11以上版本似乎PEX55AMD无法运行

我用PX55AMD破解过
没有成功
听说只有V07版本以下的可以破解
V11的不行

我妈现在在用CF62的V44版本
是移动定植机器的那个版本的

你有PX55AMD吗？传一个给我吧，我再来试下

不知道SMELTER自动算PATCH的功能55能不能用
65的是可以用的

nj528

CUT
Test Point

axelzq

哈哈，小A。。。不错～～也可以叫我Axel or X.O啊 ^_^

找到一些资料

CF62: Diese Anleitung gilt für alle Geräte mit einer SW-Version die vom Siemens Werk her kleiner oder gleich 7 war. (SW-Version ermitteln:*#06# im Gerät eintippen > Info auswählen). Auf v11 upgedatete Geräte können wieder downgedatet werden (um das Midlet ausführen zu können; ebenso v12 upgedatete). Geräte die mit v11 oder höher von Werk her versehen wurden, müssen über den Testpoint entsperrt werden!

As I Know You Cant Use Java Patcher In Cf62 With Higher Versions Than 07 And You Have To Use TP In That Phones.

我有个想法是找国外的winsup降到07版，然后再破解，因为以前有机油是91降到11后能够破解的

至于TP是肯定成功的，看你动不动手罗。

adam5237

我不敢试,害怕刷挂了我妈就没手机用了

不过确定的是TP能连上的

nj528

原帖由 axelzq 于 2006-4-9 11:33 发表
哈哈，小A。。。不错～～也可以叫我Axel or X.O啊 ^_^

找到一些资料


我有个想法是找国外的winsup降到07版，然后再破解，因为以前有机油是91降到11后能够破解的

至于TP是肯定成功的，看你动不动手罗。

WINSUP是不可能降级的。因为不联机!

axelzq

原帖由 nj528 于 2006-4-9 17:21 发表



WINSUP是不可能降级的。因为不联机!

不是的，WINSUP用的核心是和官方升级一样的，仅是界面的不同。官方可以，那么WINSUP也可以，而破解后反而不能用WINSUP，这是因为bootcore不同了，这也就是为什么我们破解后官方的不能连上了。上次下午四点半版主的M55死而复生就是个例子，需要刷回备份的bootcore才能再用上WINSUP。

不知道我这样对不对，我也希望有个肯定的结论，欢迎继续探讨 ^_^

nj528

我了解
新版本是防止被降级的，所以WS不能联机。

无疆

加油啊！
CF62是55系列的吗？

wlp_wlp

哪些型号手机的java，CF62可以用啊？