- 积分
- 19
- 实力分
- 点
- 金钱数
- 两
- 技术分
- 分
- 贡献分
- 分
|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有帐号?注册会员
x
need SX1 memory dump
« on: October 25, 2005, 12:25:24 pm »
--------------------------------------------------------------------------------
Hi all
I am making some patches, and I would need some information about the memory in the SX1.
In fact, what I need is a dump of its memory. I already got the Full Backup (Fubu) that takes 8 Mb, but I also
need the RAM memory. I think it might take 12 Mb, and can be read with TestPoint and Freia.
Also need the code chunk for RAM loaded processes, that always appears at: 0x20000000
I can read the ROM code at 0x50000000
The code at 0x80000000 I can not read because no process has permissions, but I might fix it.
Thanks a lot
Report to moderator Logged
barteks
Junior Member
Karma: 3
Offline
Gender:
Posts: 28
BartSam
Re: need SX1 memory dump
« Reply #1 on: October 25, 2005, 01:24:40 pm »
--------------------------------------------------------------------------------
i can read FF from sx1 for you. But, please, say straight, from what offsets?
As you wrote upper -
1. from 0x20000000 to... ? (is it possible to read it? it's decimally 536 870 912 .. )
2. from 0x50000000 to ?
3. and from 0x80000000 to ?
FREIA can read from sx - from 0x800000 to 0xffffff (segment 8MB - 16 MB)
How would you like to read open sx's RAM? You know, to use FREIA, phone must be turned off..
And the last - so, if you have TP, how troubles have appear, that you could not done it ?
Maybe i'm completelly wrong or i completelly didn't understand you.
Best regards
« Last Edit: October 25, 2005, 01:26:11 pm by barteks » Report to moderator Logged
--------------------------------------------------------------------------------
http://sx1.pl
FCA00000
Adult Member
Karma: 47
Offline
Posts: 66
Re: need SX1 memory dump
« Reply #2 on: October 25, 2005, 02:05:23 pm »
--------------------------------------------------------------------------------
Thanks a lot for the offer.
I didn't know that FREIA need the phone switched off. Is there a way to read when it is ON ?
With SiemensS45 I can do that using SiemensDebugger.
This information comes from Symbian documentation (search for Virtual machine model) :
Home Section: 0x80000000-0xFFFFFFFF
ROM: 0x50000000-0x5FFFFFFF . I can read using a program inside the mobile.
Loaded processes: 0x20000000
It seems that these are for a switch-on phone.
Then I need to make another program to read the memory when it is on-line.
But the Freia will also be helpfull, thank for the offer. I don't have a TestPoint, that is my problem.
I sent you a private message with my e-mail address. |
|