我的S68无法进入service模式

ankee

我的S68无法进入service模式。
已写入skey,x65flash可以联机,vk可以联机,x65PapuaUtilsV111b只可以在开机状态下联机,关机时按"service mode"再短按开机键,无法联机成功.

按论坛方法修复可以过.
如果直接用刷入别人fullflash的安全方法(就是通过IMEI和ESN重算的办法)刷入fullflash的话会无法开机,需要用"开机嘀的一声修复bootcore"才可以开机,(也就是要点那个do it job'才能修复开机.)
现在是关机后开机,一定要先死机一次才能开机成功,在联着DCA100数据线的情况下根本无法开机.
也因为这个原因无法升级MAP,  其它FFS倒可以用官方的升级.

想用x65flash格式化ffs,提示"FLASH CHENKSUM ERROR"

大侠们帮下我,看是不是机子硬件有问题还是数据线有问题.

开机下的信息:
Getting Information:
Model: SIEMENS S68C 51 lg8
Phone is in "Normal Mode". SecurityStatus: "FactoryMode"
IMEI: 358439004634877
HWID: 404
Unknown type of the Phone!
Accumulator Voltage: 3827 mV.
Code(05): OTP is Closed for write
Code(09): BootKEY is stored in EEPROM
Code(0D): Keys is stored in BCORE
Code(13): Full access to BFC functions
Code(15): Full mode (not SC)
Code(19): The control is On
Code(1D): 512x blocks presents
EELITE Info: free buffer 10144 bytes, free at all 223648 bytes, free for deleted 223648 bytes.
EEFULL Info: free buffer 147968 bytes, free at all 462560 bytes, free for deleted 200480 bytes.
MAP info: Date: 06/05/00, Variant: A 508, Std-Map/SW: 1/51, D-Map/Prov.: 193/227
Factory (OTP) IMEI: 358439004634877 - matches to flash data.
ESN: 6F63A763
HASH: 1C0B44F2E92785226CE33C78C4FC1FD2
BKEY in block 320 = 7521060B2CC5CDEB5DA83218B25C8072
SKEY in 5122 = "X" 12345678
Minimum number of firmware: 01.
Bcore ID: 0300, version: main_1.0_V8".
Phone operated: 14017957 sec.. Total Talk time: 56661 sec.
FlashID(2) - Manufact. code:0089 (Intel), type: 881C. DisplayID(1,59): Epson L2F50333T.

关机情况下的信息:
点Service Mode时:

Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
No answer to boot load!
Check port number, cable, phone, mode!
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting Power On phone...
No answer on Ping

mainboard1983

我的只能进serve mode，用都用不了

你的比我还在好一些