me75工程机无法写入Skey?

terry52911

一台Me75工程机死活写不入skey,重建了boot也没用可以联x65flash但还没办法写入skey要怎么办啊!

terry52911

papua 读出的信息：Getting Information:
Model: SIEMENS ME7C 22 lg8
Phone is in "Normal Mode". SecurityStatus: "CustomerMode"
IMEI: 004400015152174
HWID: 341
Unknown type of the Phone!
Attention: Charge Accumulator!
Accumulator Voltage: 3636 mV.
Code(05): OTP is Closed for write
Code(09): BootKEY is stored in EEPROM
Code(0C): Keys is not present in BCORE (cleared)
Code(10): BFC functions are inaccessible
Code(15): Full mode (not SC)
Code(1A): Block 76 is accessible
Code(1D): 512x blocks presents
EELITE Info: free buffer 92752 bytes, free at all 111156 bytes, free for deleted 111156 bytes.
EEFULL Info: free buffer 52497 bytes, free at all 206207 bytes, free for deleted 75167 bytes.
MAP info: Date: 09/12/05, Variant: A 403, Std-Map/SW: 1/22, D-Map/Prov.: 16/109
To Get Extended Info - Enter Skey into the phone!
Phone operated: 11594184 sec.. Total Talk time: 180364 sec.
FlashID(1) - Manufact. code:0089 (Intel), type: 880D. DisplayID(1,61): Alps Solomon SSD1286 serial











中文：


获取信息：           
Model: SIEMENS ME7C 22 lg8
手机运行模式为：    "Normal Mode"
IMEI: 004400015152174
SecurityStatus: CustomerMode
HWID: 341
注意：HWID与手机型号不相符!                       
注意:请更换电池!               
电池电压:                3612 mV.
附加信息:                 
KEY(05): OTP区段已关闭                 
KEY(09): BootKEY已记录到EEPROM中 
KEY(0C): KEYS在BCORE中未找到 (CLEAN)     
KEY(10): BFC功能不可用         
KEY(15): 完整模式            
KEY(1A): 区块76可操作    
KEY(1D): 区块  512x已找到       
EELITE info: free buffer 92752 bytes, free at all 111156 bytes, free for deleted 111156 bytes.
EEFULL info: free buffer 52497 bytes, free at all 206207 bytes, free for deleted 75167 bytes.
MAP INFO: Date: 09/12/05, Variant: A 403, Std-Map/SW: 1/22, D-Map/Prov.: 16/109
若要回去额外信息,请写入SKEY到手机!                      
手机已操作时间:    11594473 秒. 
总通话时间:             180364 秒. 
FlashID(1) - 厂商编号  : 0089 (Intel),Type: 880D.
DisplayID(1,61): Alps Solomon SSD1286 serial.

askman_1

Phone is in "Normal Mode". SecurityStatus: "FactoryMode"

得改成这个模式才可以,至于方法,搜索 FactoryMode 百度

terry52911

我换个模式试下看.

terry52911

到底怎样换模式哦！

kkfsniper

如果实在不行试试“打开所有的eep”这个补丁，

记得之前C65也是怎么都写入不了skey，后来打了这个补丁之后就可以了。