求助关于BKEY和SKEY写入的问题，无法正常升级FW和FFS。

潇潇天

                               
登录/注册后可看大图

Getting Information:
Model: SIEMENS ELC1 41 lg8
Phone is in "Normal Mode". SecurityStatus: "CustomerMode"
IMEI: 358941002686031
HWID: 407
Accumulator Voltage: 3735 mV.
Code(05): OTP is Closed for write
Code(08): BootKEY is unknown
Code(0C): Keys is not present in BCORE (cleared)
Code(10): BFC functions are inaccessible
Code(15): Full mode (not SC)
Code(1A): Block 76 is accessible
Code(1D): 512x blocks presents
EELITE Info: free buffer 199008 bytes, free at all 206240 bytes, free for deleted 206240 bytes.
EEFULL Info: free buffer 17440 bytes, free at all 465920 bytes, free for deleted 203840 bytes.
MAP info: Date: 06/05/00, Variant: S 801, Std-Map/SW: 1/41, D-Map/Prov.: 135/64
To Get Extended Info - Enter Skey into the phone!
Phone operated: 9662575 sec.. Total Talk time: 80294 sec.
FlashID(1) - Manufact. code:0089 (Intel), type: 887E. DisplayID(1,64): Unknown.

开始时肯定是已经写入了skey，可能由于不熟悉软件操作，不小心把skey从手机里擦除了，不知道是不是这个原因，导致现在升级FW时winswup419无法使用“强制安全模式”，上次强行用非安全模式升级FW及FFS成功，但是无法开机，开机就“嘀”一下就无任何反应了，他EL71目前版本为Retail的41版。

:/zk :/zk :/zk

[ 本帖最后由 潇潇天 于 2008-4-27 19:21 编辑 ]

myhaohao521

重新写入skey,客服不行用纯净的fw刷进去试试,注意备份

潇潇天

Getting Information:
Model: SIEMENS ELC1 41 lg8
Phone is in "Normal Mode". SecurityStatus: "FactoryMode"
IMEI: 358941002686031
HWID: 407
Accumulator Voltage: 4111 mV.
Code(05): OTP is Closed for write
Code(08): BootKEY is unknown
Code(0C): Keys is not present in BCORE (cleared)
Code(13): Full access to BFC functions
Code(15): Full mode (not SC)
Code(1A): Block 76 is accessible
Code(1D): 512x blocks presents
EELITE Info: free buffer 199008 bytes, free at all 206240 bytes, free for deleted 206240 bytes.
EEFULL Info: free buffer 9152 bytes, free at all 465920 bytes, free for deleted 203840 bytes.
MAP info: Date: 08/08/08, Variant: S 801, Std-Map/SW: 1/41, D-Map/Prov.: 135/64
Factory (OTP) IMEI: 358941002686031 - matches to flash data.
ESN: 299F826F
HASH: 2907F11D689ED51028AF529048EC9B2F
SKEY in 5122 = "X" 0
Minimum number of firmware: 25.
Bcore ID: 0300, version: main_1.0_V9".
Phone operated: 9670472 sec.. Total Talk time: 80297 sec.
FlashID(1) - Manufact. code:0089 (Intel), type: 887E. DisplayID(1,64): Unknown.


现在是这样了，已经4过多次，总是无法写入skey，即使提示成功写入，再点“information”还是显示  
Code(08): BootKEY is unknown
Code(0C): Keys is not present in BCORE (cleared)

选择了写入skey，但是提示如下
Checking values entered...
Test "Service key" (SKEY)...
SKEY/BKEY to the phone...
SKEY it is entered, wait...
Pause 1 second(s)...
SecurityStatus: FactoryMode
SKEY entered!
Getting Information:
Model: SIEMENS ELC1 41 lg8
Phone is in "Normal Mode". SecurityStatus: "FactoryMode"
IMEI: 358941002686031
HWID: 407
Accumulator Voltage: 4172 mV.
ESN: 299F826F



[ 本帖最后由 潇潇天 于 2008-4-27 09:39 编辑 ]

卖身葬自己了

还原以前的备份试试...

传入java算码程序...重新算码吧~~

潇潇天

有备份我就早就自己恢复了。



算的码肯定是没问题地，已经重复过多次了，我现在就怀疑是误擦除skey后无法重新写入skey，没有最原始的备份，当时入手后就把机子算码破解后备份的。

BingK

选择了写入skey，但是提示如下
Checking values entered...
Test "Service key" (SKEY)...
SKEY/BKEY to the phone...
SKEY it is entered, wait...
Pause 1 second(s)...
SecurityStatus: FactoryMode
SKEY entered!
Getting Information:
Model: SIEMENS ELC1 41 lg8
Phone is in "Normal Mode". SecurityStatus: "FactoryMode"
IMEI: 358941002686031
HWID: 407
Accumulator Voltage: 4172 mV.
ESN: 299F826F

SecurityStatus: "FactoryMode"。。。SKEY已经写入

潇潇天

我也觉得是写入了，但是图片显示

鱼世界

没有用过这个软件。。。。。。。
怎么我用的二个与你的不一样啊。。
版本不一样啊


嘿嘿。怎么不备份来着。
觉得71比68弱啊

潇潇天

兄弟地71，备份是有，他电脑中毒后他把所有盘都格了。。。

soundwin

原帖由 BingK 于 2008-4-27 11:49 发表

                               
登录/注册后可看大图

选择了写入skey，但是提示如下
Checking values entered...
Test "Service key" (SKEY)...
SKEY/BKEY to the phone...
SKEY it is entered, wait...
Pause 1 second(s)...
SecurityStatus: FactoryMode
SKEY  ...

…………碰到类似的问题，希望可以举一反三吧