S65想刷成天空版的

胡卫东

我刷机的时间，看着教程，但遇到的问题还是很多  自己解决不了  求人帮刷（用Papuautils  结果出现：
Cannot open Com3 (115200 Baud)!
No answer from the phone
Check port number, cable, phone, mode!
No answer from the phone
Check port number, cable, phone, mode!
No answer from the phone
Check port number, cable, phone, mode!
Cannot open Com3 (115200 Baud)!
Boot in "Service mode"...
Not open Com3!
Boot in "Service mode"...
Not open Com3!
Cannot open Com3 (115200 Baud)!
Cannot open Com3 (115200 Baud)!
Getting Information:
Model: SIEMENS S6C 53 lg8
Phone is in "Normal Mode". SecurityStatus: "CustomerMode"
IMEI: 353911000400524
HWID: 323
Accumulator Voltage: 3909 mV.
Code(05): OTP is Closed for write
Code(09): BootKEY is stored in EEPROM
Code(0D): Keys is stored in BCORE
Code(10): BFC functions are inaccessible
Code(15): Full mode (not SC)
Code(19): The control is On
Code(1D): 512x blocks presents
EELITE Info: free buffer 108696 bytes, free at all 119556 bytes, free for deleted 119556 bytes.
EEFULL Info: free buffer 50098 bytes, free at all 207343 bytes, free for deleted 76303 bytes.
MAP info: Date: 14/09/04, Variant: A 207, Std-Map/SW: 1/53, D-Map/Prov.: 167/129
To Get Extended Info - Enter Skey into the phone!
Phone operated: 565320 sec.. Total Talk time: 11284 sec.
FlashID(1) - Manufact. code:0089 (Intel), type: 880D. DisplayID(1,38): Epson L2F50126T.
Getting Information:
Model: SIEMENS S6C 53 lg8
Phone is in "Normal Mode". SecurityStatus: "CustomerMode"
IMEI: 353911000400524
HWID: 323
Accumulator Voltage: 3909 mV.
Code(05): OTP is Closed for write
Code(09): BootKEY is stored in EEPROM
Code(0D): Keys is stored in BCORE
Code(10): BFC functions are inaccessible
Code(15): Full mode (not SC)
Code(19): The control is On
Code(1D): 512x blocks presents
EELITE Info: free buffer 108696 bytes, free at all 119556 bytes, free for deleted 119556 bytes.
EEFULL Info: free buffer 50098 bytes, free at all 207343 bytes, free for deleted 76303 bytes.
MAP info: Date: 14/09/04, Variant: A 207, Std-Map/SW: 1/53, D-Map/Prov.: 167/129
To Get Extended Info - Enter Skey into the phone!
Phone operated: 565325 sec.. Total Talk time: 11284 sec.
FlashID(1) - Manufact. code:0089 (Intel), type: 880D. DisplayID(1,38): Epson L2F50126T.
Getting Codes from phone...
Getting Information:
Model: SIEMENS S6C 53 lg8
Phone is in "Normal Mode". SecurityStatus: "CustomerMode"
IMEI: 353911000400524
HWID: 323
Accumulator Voltage: 3909 mV.
Error switching to mode BFB!
Reading keys is supported till version 36 x65!
For correct work use "Enter SKEY in phone"!
Getting Codes from phone...
Getting Information:
Model: SIEMENS S6C 53 lg8
Phone is in "Normal Mode". SecurityStatus: "CustomerMode"
IMEI: 353911000400524
HWID: 323
Accumulator Voltage: 3909 mV.
Error switching to mode BFB!
Reading keys is supported till version 36 x65!
For correct work use "Enter SKEY in phone"!
Getting Codes from phone...
Getting Information:
Model: SIEMENS S6C 53 lg8
Phone is in "Normal Mode". SecurityStatus: "CustomerMode"
IMEI: 353911000400524
HWID: 323
Accumulator Voltage: 3891 mV.
Error switching to mode BFB!
Reading keys is supported till version 36 x65!
For correct work use "Enter SKEY in phone"!
弄不明白了    请人刷   帮忙啊        留下联系方式  我联系你

jiazhenfeng

怎么不用中文版？起码比英文好明白吧。
其实说到底你还是没有好好看教程。
起码我可以从这些看出，你的手机型号和版本。而且你没有写入skey，所以不能得到更多的东西。
所以你现在需要算skey。
具体步骤：esn hash→skey bkey→写入skey 得到vkd 可以使x65flash连接→备份→刷入天空版