求助 E71写入SKEY无法开机,

clcms

今天尝试写入E71的SKEY,写入后无法开机,

按开机无法开机,请帮忙啊

[ 本帖最后由 clcms 于 2007-7-14 02:44 编辑 ]

花都涩郎

具体步骤说说...写入SKEY时有没有用x65papu进行过什么别的操作??还有PAPU的版本是多少???

花都涩郎

如何短接键盘的两个点???:O :O

clcms

Checking value of SKEY from page "Codes"...
Auto Ignition...
Boot not loaded!
Boot released.
Checking value of SKEY from page "Codes"...
Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0020,8819 (64Mb)
CFI: 1 : 256*262144,
E71 BENQ-SIEMENS 351776011637949
HASH: A3518EA170FA2FF6A907E94D7DB427AF
OTP ESN: 1ADBF6FF
OTP IMEI: 351776011637949
At occurrence of mistakes reduce speed of port!
Established speed 460800 Baud.
Bcore x85 series found.
Reading of segment BCORE...
BCORE segment are kept in 1ADBF6FF_A0000000_BCORE_070713225948.bin
Search of a segment EELITE...
Search of a segments EEFULL...
Find blocks: 52,76,5008,5009,5077,5121,5122,5123,5468
In total EEP blocks: 145
SKEY in block 5122 = "S" 98365211
HASH in block 5468 = A3518EA170FA2FF6A907E94D7DB427AF
EEPROM Blocks saved in .\Backup\1ADBF6FF_EEP_070713230006.eep
Replacement of blocks EEPROM in the buffer ...
EEPROM: Block 52 replaced.
EEPROM: Block 76 does not require replacement.
EEPROM: Block 5008 replaced.
EEPROM: Block 5077 replaced.
EEPROM: Block 5009 does not require replacement.
EEPROM: Block 5121 replaced.
New Master codes:
*#0000*12345678#
*#0001*12345678#
*#0002*12345678#
*#0003*12345678#
*#0004*12345678#
*#0005*12345678#
EEPROM: Block 5122 replaced.
EEPROM: Block 5123 replaced.
EEPROM: Block 5468 replaced.
Work with BCORE in the buffer ...
BCORE: HASH replaced to 0BF85D88223F2D0C33B556CA40AEDADA.
BCORE: IMEI does not require replacemen.
ATTENTION! After change HASH the pone can not Power On at once in NormalMode!
First load in ServiseMode and then pass to Normal
Record of the changed blocks in phone...
New BCORE write down in the phone.
ATTENTION! Remember new BKEY: 169986D8B0C3739455CA1DB33299D46E
Write down EEPROM segments...
EEPROM segments write down.
Boot released. Everything is closed.!
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting Power On phone...
Getting Information:
Model: BENQ-SIEMENS E71C 41 lg8
Phone is in "Service Mode". SecurityStatus: "FactoryMode"
IMEI: 351776011637949
HWID: 413
Unknown type of the Phone!
Accumulator Voltage: 4175 mV.
Getting Information:
Model: BENQ-SIEMENS E71C 41 lg8
Phone is in "Service Mode". SecurityStatus: "FactoryMode"
IMEI: 351776011637949
HWID: 413
Unknown type of the Phone!
Accumulator Voltage: 4163 mV.
Switching to "Normal mode"...

迅捷数码

强刷SKEY？(:-! (:-!

water_boy

可能楼主TP时不小心，在短接电源过程中碰到了旁边的触点

完颜阿骨打

(:-!
高手.
LSD强人，。

他的儿子很乖

可能硬件问题。。。