- 积分
- 49
- 实力分
- 点
- 金钱数
- 两
- 技术分
- 分
- 贡献分
- 分
|
发表于 2008-12-9 01:06:10
|
显示全部楼层
原帖由 770121 于 2006-10-31 14:49 发表
cx70无故死机,关机。怎么办? 解决,引一份西门子的内部文档
Subject: “Switch Off” with C65,C70,CX70 Infineon Chipsets
Dear all,
in a some cases the above mentioned mobile phones manufactured before date code T7 and
assembled with Infineon Chipsets
show automatic “Switch Off” problems.
Attention: The majority of C65, C70, CX70 are not affected, due to usage of “Hitachi Chipsets”.
Explanation: There are 2 failure causes.
- A software caused problem ( Exit Code 004)
- A hardware cause problem ( Exit Code 008)
( timing of the 26MHz oscillator)
Solution:
Check the exit code (use X-Focus)
- For the SW-Problem, a software update > SW 54 solves the problem
- For the 26 MHz oscillator timing, resistor R4019 has to be replaced versus a new one.
Part-Number: L50652-C391-J2
Value 390 Ohm |
|